Sale!

D-Link DGS-F1010P-E 8 ports PoE switch.

KSh 14,000.00

Supports 10 port 1Gps with 8 PoE port switch that offers 8 10/100/1000 Mbps PoE ports, 2 10/100/1000Mbps.

8 10/100/1000 Mbps gigabit ethernet ports
2 10/100/1000 Mbps uplink port
120watts available PoE
Flow control for protection against data loss
Maximum distance of 250m
Light protection (6kV)
Operating Temperature: 0 to 40 deg C (32 to 104 deg F)

Categories: D-link, Networking Tags: 1000mbps switch with 8 poe, 10port 1000mbps switch with 8, dgsf1010pe 250m 10port 1000mbps switch, dlink dgsf1010pe 250m 10port 1000mbps, gigabit poe switch, poe ports and 2 uplink, switch with 8 poe ports

D-Link DGS-F1010P-E 8 ports PoE switch.

D-Link DGS-F1010P-E 250M 10-Port 1000Mbps Switch with 8 PoE Ports and 2 Uplink Ports. D-Link DGS-F1010P-E 8 ports PoE switch is an 8-port Gigabit Ethernet PoE switch that offers a range of advanced features and specifications. It supports IEEE 802.3af/at PoE standards, providing up to 30 watts of power per port and a total power budget of up to 120 watts. It also offers advanced Quality of Service (QoS) features, including 802.1p priority tagging and port based VLAN support, allowing for efficient traffic management and prioritization. The switch also supports loopback detection, preventing network loops and ensuring network stability. Additionally, it features a compact design and an easy-to-use web-based management interface, making it simple to set up and configure.

Features of D-Link DGS-F1010P-E 8 ports PoE switch.

The DGS-F1010P-E offers a range of advanced features that make it an ideal solution for small to medium-sized businesses looking to upgrade their network infrastructure. One of its key features is its eight Gigabit Ethernet ports with PoE technology, providing both power and data over a single cable. This makes it easy to connect and power PoE-enabled devices such as IP cameras, wireless access points, and VoIP phones. The switch also supports advanced Quality of Service (QoS) features, including 802.1p priority tagging and port based VLAN support, allowing for efficient traffic management and prioritization. It also supports loopback detection, preventing network loops and ensuring network stability. D-Link DGS-F1010P-E 8 ports PoE switch features a compact design and an easy-to-use web-based management interface, making it simple to set up and configure.

Different Switch working mode.

D-Link DGS-F1010P-E 8 ports PoE switch works in 4 operating modes using DIP switch.

VLAN: Isolating ports each other, restrain network storms effectively and improve network performance.
EXTEND: Supports 250meters long distance power supply (recommended cat 5 or above).
PoE: Automatic detection power of port, power off and restart the device if find PD device crash.
QoS: Customize application prioritization and increase network sensitivity. For example, video priority, monitoring transmission more smoothly.

Technical specifications of D-Link DGS-F1010P-E 8 ports PoE switch

Network Interface	8 10/100/1000Mbps PoE RJ45 port (port 1 ~port 8) , 2 10/100/1000Mbps uplink RJ45 port (port 9~port 10)
Transmission Rate	10/100/1000Mbps Each port supports MDI / MDIX auto-flip and auto, Network interface:10BASE-T or 100BASE-TX Ethernet RJ-45 port
Protocols and Standards	IEEE802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, ANSI/IEEE 802.3 NWay auto-negotiation, IEEE802.3x Flow Control, IEEE 802.3af/at standard
Performance	Bandwidth: 20 Gbps (no block), Network delay (100 to 100M bps): maximum 20 μs (using 64byte packet), Frame filtering and transmission rate, 10M: 14,800pps, 100M: 148,800pps, 1000M: 1488,00pps
LEDs Indicator	Power, LINK/ACT，POE
POE Pin	1/2(+) 3/6(-)
Power	Total Power: 120W
Lightning protection	6KV
Physical specifications	Dimensions (LxWxH): 184 x 94 x 27mm, Weight: 1.05kg
Environmental norms	Operating Temperature: 0°~40°C Storage Temperature: -10°C~70°C, Operating Humidity: 10%~90% non-condensing, Storage Humidity: 5%~90% non-condensing
EMC	CE Class B, FCC Part 15，Class B, VCCI Class B, C-Tick