No products in the cart.
Hikvision DS-K1201MF Fingerprint Card Reader MiFare
KSh 16,000.00
Hikvision DS-K1201MF Fingerprint Card Reader MiFare
The DS-K1201MF is a fingerprint card reader from the access control line of Hikvision. The reader is designed with a 32 bit high-speed processor and contains an optical fingerprint recognition module. It communicates with the access control via the RS-485 protocol. The reader has been tested in accordance with IP65, so that the reader can be used outside.
The reader can read MiFare cards and be connected to Hikvision’s Basic+ and Pro Complete door controllers.
Description
Hikvision DS-K1201MF Fingerprint Card Reader MiFare
Hikvision Fingerprint Card Reader supplies readers with the possibility to read EM or MiFare. This choice is in the reader and cannot be adjusted software-wise. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.
Specifications of Hikvision Fingerprint Card Reader
| System Parameters | ||
|---|---|---|
| FRR (False Rejection Rate): | ≤0.01% | |
| Fingerprint Capacity: | 5,000 | |
| Card Reading Mode: | Build-in EM or Mifare Reading Module | |
| Comparison Mode: | 1:1/1:N | |
| FAR (False Accept Rate): | ≤0.001% | |
| Card Reading Distance: | EM Card: ≤100 mm (≤3.94″) Mifare Card:≤50 mm (≤1.97″) | |
| Fingerprint Module: | Optical, Red Backlight | |
| Comparison Time: | 1:1≤1s; 1:3000≤1.5s | |
| Processor: | 32 Bit High-performance Processor | |
| Device Interfaces | ||
|---|---|---|
| Transmission Rate: | 19200bps-N-8-1 | |
| Communication Mode: | RS-485 | |
| General | ||
| Alarm: | Tamper Alarm × 1 | |
| Mounting Method: | Surface Mounting | |
| Power Supply: | 12VDC | |
| Prompt: | Buzzer | |
| LED Indicator: | Power Indicator; Status LED Indicator | |
| Protection Level: | IP 65 | |
| Working Humidity: | 10% to 90% (Non-Condensing) | |
| Working Temperature : | -40°C to +70°C (-40°F to +158°F) | |
| Dimensions (L×W×H): | 62mm × 132mm × 44mm (2.44″ × 5.20″ × 1.73″) | |
Indicators
After the hikvision card reader is powered on, LED status indicator will turn
green and blink for 1 time. Then it will turn red and blink for 3
times. At last the buzzer will send out a beep sound indicating the
starting up process is completed.
When using the card reader, it will send out different sounds
prompt and the LED indicator to indicate different statuses
For more of this products visit
Related products
Sale!
Security & Surveillance
KSh 49,500.00
Sale!
Security & Surveillance
KSh 14,500.00
KSh 40,300.00
KSh 29,000.00