Filter

Hikvision DS-K1201MF Fingerprint Card Reader MiFare

KSh 16,000.00

Optical fingerprint module.
5,000 fingerprints storage.
RS-485 interface.
Fingerprint comparison time less than 1 second.
Build-in EM/Mifare card reading module.

Categories: Hikvision, Security & Surveillance

Hikvision DS-K1201MF Fingerprint Card Reader MiFare

Hikvision Fingerprint Card Reader supplies readers with the possibility to read EM or MiFare. This choice is in the reader and cannot be adjusted software-wise. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.

Specifications of Hikvision Fingerprint Card Reader

System Parameters
FRR (False Rejection Rate):		≤0.01%
Fingerprint Capacity:		5,000
Card Reading Mode:		Build-in EM or Mifare Reading Module
Comparison Mode:		1:1/1:N
FAR (False Accept Rate):		≤0.001%
Card Reading Distance:		EM Card: ≤100 mm (≤3.94″) Mifare Card:≤50 mm (≤1.97″)
Fingerprint Module:		Optical, Red Backlight
Comparison Time:		1:1≤1s; 1:3000≤1.5s
Processor:		32 Bit High-performance Processor

Device Interfaces
Transmission Rate:		19200bps-N-8-1
Communication Mode:		RS-485
General
Alarm:		Tamper Alarm × 1
Mounting Method:		Surface Mounting
Power Supply:		12VDC
Prompt:		Buzzer
LED Indicator:		Power Indicator; Status LED Indicator
Protection Level:		IP 65
Working Humidity:		10% to 90% (Non-Condensing)
Working Temperature :		-40°C to +70°C (-40°F to +158°F)
Dimensions (L×W×H):		62mm × 132mm × 44mm (2.44″ × 5.20″ × 1.73″)

Indicators
After the hikvision card reader is powered on, LED status indicator will turn
green and blink for 1 time. Then it will turn red and blink for 3
times. At last the buzzer will send out a beep sound indicating the
starting up process is completed.
When using the card reader, it will send out different sounds
prompt and the LED indicator to indicate different statuses

For more access control products check here.